Esko Kongsberg digital cutting tables Knife Blades Milling and Routing Bits Overview

Shenzhen, Guangdong Oct 2, 2026 (Issuewire.com) - Esko Kongsberg digital cutting tables Knife Blades Milling and Routing Bits Overview

Esko Kongsberg digital cutting tables use tough carbide tooling to cut through many different materials. You can pick between flat or round knife blades for soft stocks, and high-speed bits for routing rigid materials. Choosing the right geometry ensures your table makes clean edges on every job.

Esko Kongsberg digital cutting tables Knife Blades: Main Models and Applications

Esko Kongsberg digital cutting tables (such as the C, X, XE, and XL series) utilize a wide range of precision solid tungsten carbide knife blades designed for specific tool heads, motion profiles, and material densities

Blade Model: BLD-SR6224
- Shank Diameter: 6 mm
- Type / Geometry: Single edge with an angle between 24° and 25°
- Maximum Cutting Depth: Up to 12 mm
- Primary Applications & Materials: Designed for cutting corrugated board with significant recycled content, heavy display carton, and solid board.

Blade Model: BLD-SR6303
- Shank Diameter: 6 mm
- Type / Geometry: Oscillating with a high-precision tip
- Maximum Cutting Depth: Up to 12 mm
- Primary Applications & Materials: Suitable for cutting foamed PVC, polypropylene, folding carton, gasket materials, and hard foam.

Blade Model: BLD-SR6310
- Shank Diameter: 6 mm
- Type / Geometry: Oscillating with a long-reach blade
- Maximum Cutting Depth: Up to 25 mm
- Primary Applications & Materials: Ideal for thick honeycomb panels, re-board, expanded foam, and thick corrugated materials.

Blade Models: BLD-SR6315 / SR6317
- Shank Diameter: 6 mm
- Type / Geometry: Oscillating, designed for deep cuts
- Maximum Cutting Depth: Between 30 and 50 mm
- Primary Applications & Materials: Efficient in cutting soft to medium-density foam packaging, insulation panels, and sponge materials.

Blade Model: BLD-DR8160
- Shank Diameter: 8 mm
- Type / Geometry: Double edge with a symmetrical 60° angle
- Maximum Cutting Depth: 6 mm
- Primary Applications & Materials: Optimized for heavy-duty cutting on CorruSpeed/RM tools; proficient in high-speed processing of corrugated plastic, PVC, and solid carton.

Blade Model: BLD-SR8170
- Shank Diameter: 8 mm
- Type / Geometry: Single edge with a heavy-duty point
- Maximum Cutting Depth: Ranges from 12 to 15 mm
- Primary Applications & Materials: Engineered for tough synthetic materials, rubber gaskets, thick leather, and dense corrugated plastics.

Blade Model: BLD-DR8180
- Shank Diameter: 8 mm
- Type / Geometry: Double edge with a long blade
- Maximum Cutting Depth: Between 15 and 20 mm
- Primary Applications & Materials: Suited for high-speed cutting of heavy corrugated boards, triple-wall corrugated, and heavy plastic fluted sheets.

Blade Models: BLD-SF216 / DF112
- Shank Designation: Flat Shank
- Type / Geometry: Drag / Kiss-cut blade
- Maximum Cutting Depth: Between 1 and 3 mm
- Primary Applications & Materials: Specialized for vinyl, pressure-sensitive films, paper, thin folding carton, and polyester film.

Esko Kongsberg digital cutting tables Milling and Routing Bits Main Models and Applications

Esko Kongsberg's milling and routing tools utilize solid tungsten carbide, especially crafted to process dense and rigid materials where traditional knife blades prove ineffective. These bits operate at elevated speeds on specialized tool heads, such as the MultiCUT-HP 3kW spindle, ensuring precise and clean edges on challenging substrates.

Primary Bit Classifications

1. BIT-AUS (Multi-Purpose Up-Cut): Designed with upward-spiraling flutes, these bits efficiently evacuate chips from the groove, minimizing heat buildup, particularly in plastics and acrylics.
2. BIT-ADS (Down-Cut Control): These bits apply downward pressure during operation, maintaining a burr-free top edge and preventing thin substrates from lifting.
3. BIT-EBV (V-Groove & Folding): Specifically engineered for creating precise angled channels in composite panels, these bits enable folding into three-dimensional boxes or rigid signs.

Prominent Models and Their Applications

1. BIT-AUS06-4022-50:
- Application: Rigid PVC, acrylic sheets, and dense plastics.
- Specifications: 6mm shank with geometry optimized to avoid melting or chipping of plastics during extended usage cycles.

2. BIT-EBV06-94:
- Application: Aluminum Composite Materials (ACM), Dibond, and foldable panels.
- Specifications: 6mm shank featuring a 90-degree V-shape and capable of a maximum milling depth of 4mm.

3. BIT-AUS03-3022-50:
- Application: Suitable for fine engraving, small display lettering, and intricate shapes.
- Specifications: 3mm precise micro-shank designed for detailed cutting paths without breakage.

4. BIT-AUS06-6022-58:
- Application: Ideal for thick wood panels, medium-density fiberboard (MDF), and heavy-duty sign boards.
- Specifications: 6mm wide-flute shank engineered for efficient chip extraction during deeper material processes

Best Practices for Tool Maintenance & Performance

• Automatic Depth Calibration:Kongsberg cutting tables utilize dynamic Z-control and integrated tool tip height sensors to automatically measure blade length or bit tip position relative to the bed. Calibration should be run after every blade or bit swap to prevent underlay damage.

• Cooling & Lubrication: When routing aluminum or heavy composite materials, ensure the spindle's oil-mist coolant unit is active to extend bit life and prevent edge welding.

• Vacuum Hold-Down Management: Match underlay felt or PVC material density to the routing or cutting process to ensure sufficient vacuum suction across the entire bed surface area.

For more information about Shenzhen Oyea Machinery, please visit the company's official website: [link here].

Media Contact
Company Name: Shenzhen Oyea Machinery Co., Ltd.
Email: [email protected]
Address: No. 2008, Shennan Road, Futian District, Shenzhen
City: Shenzhen
Country: China
Website: https://www.oyea-blades.com/

Media Contact

Shenzhen Oyea Machinery Co., Ltd

[email protected]

18823852826

No. 2008, Shennan Road, Futian District, Shenzhen

https://www.oyea-blades.com/